User guide

240 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Monitoring the Switch
show critical-resources
show critical-resources
Description
Displays information about the conÞguration of critical resources.
Syntax Description
This command has no parameters or options.
Default
N/A.
Usage Guidelines
In full-NAT mode (full Network Address Translation), the Px-series application switch must have
sufÞcient proxy IP addresses conÞgured to allow millions of connections going through the switch. This
commands shows how many resources are conÞgured, used, and available.
Example
This example shows the conÞguration of critical resources.
station2:6 # show critical-resources
nat-mode full is configured.
Proxy-ips configured : 3
Proxy-ip connection capacity : 193536
Proxy-ip connection usage : 0
Layer 4 connection capacity : 64504
Layer 4 connection usage : 0
Layer 7 connection capacity : 129016
Layer 7 connection usage : 0
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.