User guide

236 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Monitoring the Switch
show connections details
show connections {vip <IP address> {port <port number>}} details
Description
Displays a list of the open connection.
Syntax Description
Default
N/A.
Usage Guidelines
Parameters to this command allow you to limit the display to connections to the speciÞed IP address or
the speciÞed IP address and port.
Example
This example displays all open connections.
SummitPx1:35 # sh conn details
Flags: 4 - Layer 4, 7 - Layer 7, T - TCP, U - UDP
Age is in seconds
State: ESTAB - ESTABLISHED, CLSWT - CLOSE_WAIT
Client IP Virtual IP Proxy IP Server IP
and Port and Port and Port and Port Flags Age State
-------------- --------------- --------------- --------------- ----- --- -----
10.5.9.16 10.6.2.100 10.6.2.15 10.6.3.48 7T 3 CLSWT
43935 8080 55142 80
10.5.9.16 10.6.2.100 10.6.2.15 10.6.3.49 7T 3 CLSWT
43939 8080 55143 80
10.5.9.16 10.6.2.100 10.6.2.15 10.6.3.50 7T 3 CLSWT
43940 8080 55144 80
10.5.9.16 10.6.2.100 10.6.2.15 10.6.3.51 7T 3 CLSWT
43936 8080 55145 80
10.5.9.16 10.6.2.100 10.6.2.15 10.6.3.52 7T 3 CLSWT
43941 8080 55146 80
History
This command was available in ExtremeWarePx 1.1.
IP address VIP for the service of interest
port number port number for the service of interest