User guide

216 ExtremeWarePx1 1.2 Command Reference Guide
Health-Check Commands
configure server-group health-check retry-interval
configure server-group name <name string> health-check
retry-interval <seconds>
Description
ConÞgures the retry-interval property for the speciÞed server group.
Syntax Description
Default
If this command is not issued, the global default value for the retry-interval property is used.
Usage Guidelines
You must have administrator privileges to issue this command.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command sets the retry-interval property to 15 seconds for the server group named
srvgroup1.
configure server-group name "srvgroup1" health-check retry-interval 15
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
name string The name of the server group for which to configure the property.
seconds The time interval between rechecks after a failed health check for servers in the specified
group.