User guide

210 ExtremeWarePx1 1.2 Command Reference Guide
Health-Check Commands
configure server-group health-check fail-after
configure server-group name <name string> health-check
fail-after <number>
Description
ConÞgures the fail-after property for the speciÞed server group.
Syntax Description
Default
If this command is not issued, the global default value for the fail-after property is used.
Usage Guidelines
You must have administrator privileges to issue this command.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command sets the fail-after property to 3 for the server group named srvgroup1.
configure server-group name "srvgroup1" health-check fail-after 3
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
name string The name of the server group for which to configure the property.
number The number of consecutive failed health checks after which a server in the specified group is
removed from service.