User guide

20 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Managing the Switch
clear log
clear log {static}
Description
Clears the application-switch internal log.
Syntax Description
Default
N/A.
Usage Guidelines
The application-switch log tracks all conÞguration and fault information pertaining to the device. The
switch maintains 200 messages in its internal log. By default, log entries that are assigned a critical or
warning level remain in the log after a switch reboot. Issuing a clear log command does not remove
these static entries. To remove log entries of all levels (including warning or critical), use the clear log
static
command.
Example
This example clears all log messages, including critical and warning log messages, from the application
switchÕs internal log:
SummitPx1:8 # clear log static
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
static If static is specified, the critical log messages are also cleared.