User guide

unconfigure vrrp auto-sync master
ExtremeWarePx1 1.2 Command Reference Guide 199
unconfigure vrrp auto-sync master
unconfigure vrrp auto-sync master partner-ip <IP address>
Description
UnconÞgures the master switch for automatic synchronization.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
You issue this command on the backup switch for automatic synchronization. You use this command
when you want to change the switch from being backup to being master.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command unconÞgures the master switch with IP address 10.4.3.2.
unconfigure vrrp auto-sync master partner-ip 10.4.3.2
History
This command was available in ExtremeWarePx 1.2.
Platform Availability
This command is available on the Px-series application switch.
IP address The system IP address of the current master switch, as set by the configure vrrp
auto-sync master command