User guide

198 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Configuring Redundancy
unconfigure vrrp auto-sync backup
unconfigure vrrp auto-sync backup partner-ip <IP address>
Description
UnconÞgures the backup switch for automatic synchronization.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
You issue this command on the master switch for automatic synchronization. You use this command
when you want to change the switch from being master to being backup.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command unconÞgures the backup switch with IP address 10.2.3.4.
unconfigure vrrp auto-sync backup partner-ip 10.2.3.4
History
This command was available in ExtremeWarePx 1.2.
Platform Availability
This command is available on the Px-series application switch.
IP address The system IP address of the current backup switch, as set by the configure vrrp
auto-sync backup command