User guide

enable vrrp serial-failover
ExtremeWarePx1 1.2 Command Reference Guide 197
enable vrrp serial-failover
enable vrrp serial-failover
Description
Enables VRRP serial failover on the application switch.
Syntax Description
This command has no parameters or options.
Default
VRRP serial failover is disabled by default.
Usage Guidelines
You must have administrator privileges to issue this command.
You must use the build command to commit the conÞguration changes made by this command.
Example
This command enables VRRP serial failover.
enable vrrp serial-failover
History
This command was available in ExtremeWarePx 1.2.
Platform Availability
This command is available on the Px-series application switch.