User guide

180 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Configuring Redundancy
configure vrrp auto-sync forcesync
configure vrrp auto-sync forcesync
Description
Forces automatic synchronization from the master switch to the backup switch.
Syntax Description
This command has no parameters or options.
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
When automatic synchronization is enabled, you can issue this command on the master switch. The
result is that conÞguration commands for servers, server groups, services, domains, and pattern rules
are sent from this switch to the backup switch that was identiÞed with the configure vrrp auto-sync
backup
command. The copied commands replace the corresponding commands on the backup switch.
After all the commands have been replaced, the conÞguration is saved and the backup switch is
rebooted.
If you issue this command on the backup switch, an error is reported.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command forces automatic synchronization.
configure vrrp auto-sync forcesync
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.