User guide

18 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Managing the Switch
build
build
Description
Executes all pending commands issued since the last build.
Syntax Description
This command has no parameters or options.
Default
N/A.
Usage Guidelines
Most commands are not executed immediately, but are deferred until you issue a build command. After
making any conÞguration changes, you must issue the build command to commit those changes.
Example
In this example, the Þrst three commands (numbered 11 through 13) change the SNMP conÞguration.
These changes do not take effect until the build command (number 14) commits them.
SummitPx1:11 # configure snmp sysName "balancer"
* SummitPx1:12 # configure snmp sysLocation "Exodus Colo"
* SummitPx1:13 # configure snmp sysContact "Web Admin"
* SummitPx1:14 # build
** Configuring proxy-ip
** Configuring server table
** Configuring server-group table
** Configuring service table
** Updating Health List tables
** Updating self audit parameters.
** Updating Snmp Parameters.
** Gigabit port enabled
** Updating VRRP parameters.
** Updating autosync parameters.
History
This command was available in ExtremeWarePx 1.1.