User guide

172 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Configuring Redundancy
configure vrrp add master vrid
configure vrrp add master vrid <VRID number>
Description
Adds a VRRP class to the application switch, giving the switch master priority for this class.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
A switch can have a total of 16 different VRRP classes.
The new VRRP class is conÞgured to have a priority of 255. ItÕs advertisement interval is 1 second. The
preempt property is irrelevant for the new class because a switch with master priority always preempts
the active switch.
To add a VRRP class with the default priority, use the configure vrrp add vrid command instead of
this command.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command adds a VRRP class with the VRID 2 and priority 255.
configure vrrp add master vrid 2
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
VRID number The VRID of the VRRP class to be added; a number between 1 and 255.