User guide

159 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Persistence Modes, and NAT Modes
configure timeout udp-flow-persistence
configure timeout udp-flow-persistence <seconds>
Description
Sets the UDP-ßow-persistence timer.
Syntax Description
Default
The default value for this timer is 40 seconds.
Usage Guidelines
You must have administrator privileges to issue this command.
The Px-series application switch provides UDP persistence. A UDP ßow is recycled if it is idle for the
time speciÞed by the UDP-ßow-persistence timer.
You must use the build command to commit the conÞguration changes made by this command.
Example
The following command sets the UDP-ßow-persistence timer to 1 minute (60 seconds).
configure timeout udp-flow-persistence 60
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
seconds The number of seconds after which an idle UDP flow should be recycled; a number between
1 and 8000, inclusive.