User guide

142 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Configuring Servers and Services
unconfigure server
unconfigure server
[(index <index number> {- <index number>}) |
(ipaddress <IP address> {- <IP address>} port <port number>)]
Description
Removes one or more servers from the system.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
You can identify a server to be removed either by its index number or by its IP address and port
number. This command allows you to remove a number of servers with consecutive index numbers or a
number of servers with consecutive IP addresses, all of which use the same port.
To remove a server from a server group but leave it conÞgured in the system so that it can be added to
a different group, use the configure server-group delete-server command instead of this command.
You must use the build command to commit the conÞguration changes made by this command.
Example
This example removes servers with indexes 3 through 5:
SummitPx1:21 # unconfigure server index 3 - 5
* SummitPx1:22 # build
History
This form of the command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
index number The unique index number of a server to be removed.
IP address The IP address of a server to be removed. The IP address plus the port number uniquely
identify a server.
port number The port number of the servers to be removed. The port number plus the IP address
uniquely identify a server.