User guide

configure pattern-rule default
ExtremeWarePx1 1.2 Command Reference Guide 117
configure pattern-rule default
configure pattern-rule default
server-group-name <group name>
[noqos |
(dot1p-to-svr <dot1p-to-svr tag>
dot1p-to-net <dot1p-to-net tag>
diffserv-to-svr <diffserv-to-svr tag>
diffserv-to-net <diffserv-to-net tag>)]
Description
ConÞgures the default pattern rule for the current domain of a current layer 7 service.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
This command applies to the current domain of the current service. The current service is the service that
was speciÞed in the most recently issued configure service L7 command. The current domain is the
group name The name of the server group to select if the URL in the client request does not match any
pattern rule of the current domain of the current service.
noqos Indicates that the service does not tag traffic based on the application or transaction type
dot1p-to-svr tag Specifies whether to apply a tag to the 802.1p header for packets directed to the server; one
of the following values:
• The keyword preserve indicates that no tag is applied to this type of traffic.
• A hexadecimal number from 0x00 to 0x07, inclusive, is the tag to be applied to this type of
traffic.
dot1p-to-net tag Specifies whether to apply a tag to the 802.1p header for packets directed to the network;
one of the following values:
• The keyword preserve indicates that no tag is applied to this type of traffic.
• A hexadecimal number from 0x00 to 0x07, inclusive, is the tag to be applied to this type of
traffic.
diffserv-to-svr tag Specifies whether to apply a tag to the DiffServ code point for packets directed to the server;
one of the following values:
• The keyword preserve indicates that no tag is applied to this type of traffic.
• A hexadecimal number from 0x00 to 0x3F, inclusive, is the tag to be applied to this type
of traffic.
diffserv-to-net tag Specifies whether to apply a tag to the DiffServ code point for packets directed to the
network; one of the following values:
• The keyword preserve indicates that no tag is applied to this type of traffic.
• A hexadecimal number from 0x00 to 0x3F, inclusive, is the tag to be applied to this type
of traffic.