User guide

use image
ExtremeWarePx1 1.2 Command Reference Guide 107
use image
use image [primary | secondary]
Description
ConÞgures the switch to use a saved image on the next reboot.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
You can issue the show switch command to see which image is currently being used.
Example
The following command conÞgures the switch to use the primary image on the next reboot:
use image primary
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
primary Specifies the primary saved software image.
secondary Specifies the secondary saved software image.