User guide

106 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Managing the Switch
use configuration
use configuration [primary | secondary]
Description
ConÞgures the switch to use a previously saved conÞguration on the next reboot.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
You can issue the show switch command to see which conÞguration is currently being used.
Example
The following command speciÞes that the next reboot should use the primary saved conÞguration:
use configuration primary
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
primary Specifies the primary saved configuration.
secondary Specifies the secondary saved configuration.