User guide

unconfigure switch
ExtremeWarePx1 1.2 Command Reference Guide 103
unconfigure switch
unconfigure switch {all}
Description
Removes the switch conÞguration, restoring factory defaults.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
This command removes the current conÞguration and restores the servers, services and system
conÞguration to factory defaults. If you specify the all keyword, conÞguration of user accounts is also
removed.
The default conÞguration takes effect when you reboot the switch.
Example
This example removes the conÞguration but keeps user accounts.
* station2:7 # unconfig switch
Restore factory defaults (except user accounts) and reboot? (yes or no): y
This example removes the conÞguration including user accounts:
* station2:6 # unconfig switch all
Restore factory defaults and reboot? (yes or no): y
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
all Specifies that user accounts should be removed.