User guide

102 ExtremeWarePx1 1.2 Command Reference Guide
Commands for Managing the Switch
unconfigure mgmt iproute
unconfigure mgmt iproute
dest-ip <destination IP address>
gateway <gateway IP address>
Description
Removes a route from the routing table for the switchÕs 10/100BT port.
Syntax Description
Default
N/A.
Usage Guidelines
You must have administrator privileges to issue this command.
The 10/100BT port has a separate routing table. By default, no routes are installed in the routing table;
add routes to the table with the configure mgmt ipaddress command.
This command removes the routing-table entry indicating that trafÞc for destination IP address
should be directed to gateway IP address.
The conÞguration of management-port information is executed immediately; you do not need to issue
the build command for this command to take effect.
Example
This example removes a route:
station1:4 # unconfig mgmt iproute dest-ip 10.10.10.60 gateway 10.10.10.1
History
This command was available in ExtremeWarePx 1.1.
Platform Availability
This command is available on the Px-series application switch.
destination IP address The destination IP address.
gateway IP address The gateway IP address.