User guide

Figures ix
Figures
1-1 PoS module 1-4
1-2 Front panel views of the P3cSi and P3cMi modules 1-6
1-3 Front panel views of the P12cSi and P12cMi modules 1-7
2-1 Slot locations in a BlackDiamond 6800 series chassis 2-6
2-2 Inserting and securing a PoS module 2-8
3-1 Default configuration for BCP 3-4
3-2 IPCP configuration 3-6
3-3 APS configuration, port redundancy 3-8
3-4 APS configuration, module redundancy 3-9
3-5 APS configuration for switch redundancy 3-10
3-6 View of logical connectivity to PoS ports with IPCP enabled 3-24
3-7 View of logical connectivity to PoS ports with BCP enabled 3-25
3-8 Comparisons of RED and WRED operation 3-53
3-9 Format of NetFlow export datagram 3-61
3-10 NetFlow Collection Architecture Example 3-63
3-11 Linear 1+1 APS architecture 3-75
3-12 Linear 1+1 APS architecture with two switches 3-76
3-13 Virtual APS router configuration 3-78
3-14 Logical PPP connectivity to virtual APS router 3-79
3-15 Format of SONET K1 and K2 Bytes 3-80
3-16 Typical redundant switch configuration without APS 3-82
3-17 Redundant switch configuration with APS 3-83
3-18 APS configuration providing faster recovery from
line failure 3-84
3-19 APS in bridging configuration 3-85
3-20 Port tunneling via a PPP link 3-98