User guide

iv - Index Packet Over SONET Module Installation and User Guide
PoS port tunnel, configuring 3-98
port tunneling 1-12, 3-97
Ethernet module, configuring 3-99
MPLS tls- tunnel, configuring 3-100
PoS module
feature summary 1-7
GPP subsystem 1-5
hot-swapping 1-2
installing 2-7
LED indicators 1-5, 2-10, 2-12
network processors 1-5
optical interface characteristics 1-3, 2-3
physical description 1-4
troubleshooting 2-11
PPP
authentication database entry, creating 3-31
authentication, configuring 3-30
BCP 1-9, 3-24
CHAP 1-9, 3-23
configuration commands (table) 3-26
configuration parameter values, resetting 3-37
delayed-down-time interval, configuring 3-35
EDPCP 1-9, 3-26
Frame Check Sequence (FCS), configuring 3-27
IPCP 1-9, 3-23
LCP 1-9, 3-23
Link Quality Monitoring (LQM), configuring
3-29
LQR 1-9, 3-23
maximum receive unit (MRU) 3-104
MPLSCP 3-25
NCP
BCP, configuring 3-33
IPCP, configuring 3-33
overview 1-9, 3-22
PAP 1-9, 3-23
payload data scrambling, configuring 3-27
port name and password, configuring 3-31
port status information, displaying 3-36
PoS checksum, configuring 3-27
PoS scrambling, configuring 3-27
precedence levels 3-56
protocol-based VLANs 3-38, A-8, A-9
Q
QoS
802.1p and 802.1Q support 3-39
configuring 3-43
DiffServ support 3-43
functions 1-10, 3-43
profile, configuring 3-44
RED support 3-43
support overview 1-8
QoS monitor 3-59
Quality of Service. See QoS
Quality Report option 3-23
R
Random Early Detection. See RED
RDI-L event counter (SONET) 3-18
RDI-P event counter (SONET) 3-18
RED
commands (table) 3-43
configuration information, displaying 3-59
drop probability, configuring 3-51
enhancements for PoS support 3-51
minimum queue length threshold, configuring
3-54
operation compared to WRED (figure) 3-52
PHB support 3-55
ports, enabling and disabling 3-54
REI-L event counter (SONET) 3-18
REI-P event counter (SONET) 3-18
remote defect indicator—line (RDI-L) 3-20
remote defect indicator—path (RDI-P) 3-20
remote error indicator—line (REI-L) 3-20
remote error indicator—path (REI-P) 3-20
Remote Monitoring. See RMON
RIP 3-105
RMON A-8
routing over PoS ports 3-6
S
safety information 2-4
SAP 3-105
SD BER event counter (SONET) 3-19
SDH 1-9
section parity errors (SONET) 3-18
SF BER event counter (SONET) 3-19
signal degrade bit error rate (SD BER) 3-20
signal failure bit error rate (SF BER) 3-20
software
checking version compatibility 2-2
downloading packages 2-2
technology release version identifier 2-2
version requirements 2-2
SONET
clock source 3-5, 3-14
configuration parameter values, resetting 3-17
configuration parameter values, summary
(table) 3-5
error and alarm events (table) 3-19
framing type 3-5, 3-13
overview 1-9
Path Trace identifier 3-5, 3-16
port configuration commands (table) 3-13
port status information, displaying 3-18
Section Trace byte 3-5, 3-15
Section Trace identifier 3-5, 3-15
Signal Degrade threshold 3-5, 3-15
Signal Fail threshold 3-5, 3-14
Signal Label 3-5, 3-17