User guide

Packet Over SONET Module Installation and User Guide A-7
Changed Commands
disable ports <portlist> For PoS modules, this command brings down the
PPP link on the specified port, and changes the
port status LED to blinking green.
enable jumbo-frame ports [<portlist> | all] This command applies to PoS ports when
enabling jumbo-frame support changes the
negotiated maximum receive unit (MRU) size.
enable ports <portlist> For PoS modules, this command enables the
PPP link on the specified port, and changes the
port status LED to solid green (if no other
problems exist).
restart ports <portlist> For PoS modules, this command causes the PPP
link to be renegotiated.
show diagnostics {<slot>} This command displays results of diagnostics for
the PoS module.
show ports {<portlist>} info {detail} The information displayed by this command will
include new DiffServ and RED configuration
parameters.
show ports {<portlist>} rxerrors Only a subset of the statistics displayed by this
command are applicable to PoS ports. The fields
that do not apply to PoS ports are displayed with
values of all zeroes.
show ports {<portlist>} txerrors Only a subset of the statistics displayed by this
command are applicable to PoS ports. The fields
that do not apply to PoS ports are displayed with
values of all zeroes.
show slot <slot> For the PoS module, the information displayed by
this command will include data about the
software images loaded on the module, as well
as status information on the network processors
and GPP.
show version The information displayed by this command will
include data about the PoS I/O module and the
bootrom version of the PoS I/O module.
Table A-3: Summary of Commands with Augmented Implementation (continued)
Command Description