User guide

A-4 Packet Over SONET Module Installation and User Guide
config sonet threshold signal degrade
<error_rate> ports <portlist>
Configures the Signal Degrade threshold for the
specified SONET ports.
config sonet threshold signal fail <error_rate>
ports <portlist>
Configures the Signal Failure threshold for the
specified SONET ports.
config sonet trace path <id_string>
ports <portlist>
Configures the Path Trace Identifier string for the
specified SONET ports.
config sonet trace section [<id_byte> |
string <id_string>] ports <portlist>
Configures the Section Trace Identifier for the
specified SONET ports.
create aps <group#> Creates an APS group with the specified group
number.
delete aps <group#> Deletes the specified APS group.
disable aps Disables the APS function for an entire switch.
disable flowstats filter <filter#>
ports <portlist> [ingress | egress]
Disables a specified flow record filter for the
specified SONET ports.
disable flowstats ping-check {<group#>} Disables the flow statistics ping-check function for
a specified group of collector devices.
disable flowstats ports <portlist> Disables the flow statistics function on the
specified SONET ports.
enable aps Enables the APS function for an entire switch.
enable flowstats filter <filter#> ports <portlist>
[ingress | egress]
Enables a specified flow record filter for the
specified SONET ports.
enable flowstats ping-check {<group#>} Enables the flow statistics ping-check function for
a specified group of collector devices.
enable flowstats ports <portlist> Enables the flow statistics function on the
specified SONET ports.
show aps {<group#>} {detail} Displays APS group status information.
show flowstats {<portlist> | export {<group#>}
{detail}}
Displays status information for the flow statistics
function.
show ppp {<portlist>} {detail} Displays status information for PPP ports.
show sonet {<portlist>} {detail} Displays SONET port status.
unconfig aps <group#> Resets the APS group configuration parameters
to their default values.
unconfig diffserv dscp-mapping
ports <portlist>
Resets the DSCP mapping tables for the
specified PoS ports to their default values.
Table A-1: New ExtremeWare Commands (continued)
Command Description