User guide

A-2 Packet Over SONET Module Installation and User Guide
New ExtremeWare Commands
Table A-1 lists the new ExtremeWare commands that have been added to support the
PoS module. For more information on these commands, see Chapter 3.
Table A-1: New ExtremeWare Commands
Command Description
config aps <group#> [nonrevert |
revert <minutes>]
Configures APS operation in either nonrevertive
or revertive switching mode.
config aps <group#> add <port> [working |
protection <ipaddress>]
Adds a SONET port to an APS group.
config aps <group#> authenticate [off |
on <string>]
Configures authentication of APS control
messages.
config aps <group#> delete <port> Deletes a SONET port from an APS group.
config aps <group#> force [off | working |
protection]
Requests that an APS group be forced to use a
specified line as the active line.
config aps <group#> lockout [off | on] Controls whether a switch to the protection line is
locked out.
config aps <group#> manual [off | working |
protection]
Manually determines whether an APS group uses
its working line or its protection line as the active
line.
config aps <group#> timers <seconds>
<consecutive_misses>
Sets the values of the timers used in the APS
hello protocol that is exchanged between the
working and protection switches for an APS
group.
config diffserv dscp-mapping
<input_codepoint>/<output_codepoint>
ports <portlist> {egress {no-congestion |
congestion} | ingress}
Configures a mapping between an input DiffServ
code point (DSCP) and an associated output
DSCP for the specified PoS ports.
config dot1q tagmapping
<input_vlanid/output_vlanid> ports <portlist>
{egress {priority <priority>} | ingress
{priority <priority>}}
Configures the VLAN tag mapping tables for a
PoS port.
config dot1q tagnesting {<vlanid> |
<vlanid_range>} [off | pop |
push <new_vlanid> {priority <priority>}]
ports <portlist> {egress | ingress}
Configures the VLAN tag nesting attributes for a
PoS port.
config flowstats export {<group#>} [add |
delete] [<ipaddress> | <hostname>]
<udp_port>
Configures the flow-collector devices to which
NetFlow datagrams are exported.