User guide

Packet Over SONET Module Installation and User Guide 3-103
Additional PoS Module Support Topics
Table 3-18: Changes to Port Commands
Command Description of Change
disable jumbo-frame ports [<portlist> | all] Augmented implementation: This command
applies to PoS ports when disabling jumbo-frame
support changes the negotiated maximum
receive unit (MRU) size.
disable ports <portlist> Augmented implementation: For PoS modules,
this command brings down the PPP link on the
specified port, and changes the port status LED
to blinking green.
enable jumbo-frame ports [<portlist> | all] Augmented implementation: This command
applies to PoS ports when enabling jumbo-frame
support changes the negotiated maximum
receive unit (MRU) size.
enable ports <portlist> Augmented implementation: For PoS modules,
this command enables the PPP link on the
specified port, and changes the port status LED
to solid green (if no other problems exist).
restart ports <portlist> Augmented implementation: For PoS modules,
this command causes the PPP link to be
renegotiated.
show ports {<portlist>} info {detail} Augmented implementation: The information
displayed by this command includes DiffServ and
RED configuration parameters for the PoS
module ports.
show ports {<portlist>} qosmonitor {egress |
ingress} {discards}
Enhanced command: The optional egress,
ingress, and discards keywords display
information for PoS ports.
By default, the command displays transmissions
in the egress direction. The ingress keyword
causes the command to monitor and display
queue statistics for the ingress direction. The
discard keyword causes the command to monitor
and display packet discard statistics rather than
transmission statistics. Currently, the egress,
ingress, and discard keywords apply only to PoS
ports.
show ports {<portlist>} rxerrors Augmented implementation: Only a subset of
the statistics displayed by this command are
applicable to PoS ports. The fields that do not
apply to PoS ports are displayed with values of
all zeroes.