User guide

3-74 Packet Over SONET Module Installation and User Guide
Configuring the PoS Module
The detailed status display for an export group includes the summary information, plus
the following management information:
• Counts of the flow records that have been exported to each flow collector destination
• Counts of the number of times each flow collector destination has been taken out of
service due to health-check (ping check) failures
MIB Support for Flow Statistics
Because there are no standard MIBs defined for managing the NetFlow function,
Extreme Networks has defined and implemented an enterprise MIB that provides
read-only support (GET operations but not SET operations) for NetFlow configuration
parameters and status information. Any of the parameters that can be set with the
config flowstats commands can be accessed using the MIB, and any of the status
information displayed by the
show flowstats command can also be read using the
MIB. For more information on the MIB, see Appendix B, “Supported MIBs and
Standards.”