User guide

Packet Over SONET Module Installation and User Guide 3-73
Configuring and Monitoring Flow Statistics
The following command example resets the flow statistics configuration parameters for
port 1 of the PoS module installed in slot 8 of the BlackDiamond switch to their default
values.
unconfig flowstats ports 8:1
Displaying Flow Statistics Status Information
To display status information for the flow statistics function, use the following
command:
show flowstats {<portlist> | export {<group#>} {detail}}
where:
If you enter the
show flowstats command with none of the optional keywords or
parameters, the command displays a summary of status information for all ports.
The summary status display for a port includes the following information:
• Values for all flow statistics configuration parameters
• Count of flow records that have been exported
• Counts of the number of packets/bytes for which flow statistics were not maintained
because of insufficient resources
The summary status display for an export group includes the following information:
• Values for all configuration parameters
• Status of each export destination device
portlist Use this optional parameter to specify the SONET port for which
status information is to be displayed.
export Use this optional keyword to display status information for export
groups, which are configured on a switch-wide basis.
group# Use this optional parameter with the export keyword to display
status information for a specific export group. If you do not specify a
value for the group# parameter, the export keyword by itself
displays status information for all export groups.
detail Use this optional keyword to display detailed export group status
information.