User guide

Packet Over SONET Module Installation and User Guide 3-65
Configuring and Monitoring Flow Statistics
Commands for Configuring and Monitoring Flow Statistics
Table 3-14 is an alphabetical list of the ExtremeWare flow statistics commands that
support the PoS module. Each command is described in detail in the sections that
follow.
Table 3-14: Flow Statistics Commands
Command Description
config flowstats export {<group#>} [add |
delete] [<ipaddress> | <hostname>]
<udp_port>
Configures the flow-collector devices to which
NetFlow datagrams are exported.
config flowstats filter <filter#> {aggregation}
{export <group#>} ports <portlist>
[ingress | egress] <filterspec>
Configures a flow record filter for the specified
SONET ports.
config flowstats source ipaddress
<ipaddress>
Configures the IP address that is to be used as
the source IP address for NetFlow datagrams to
be exported.
config flowstats timeout <minutes> ports
<portlist>
Configures the timeout value for flow records on
the specified SONET ports.
disable flowstats filter <filter#>
ports <portlist> [ingress | egress]
Disables a specified flow record filter for the
specified SONET ports.
disable flowstats ping-check {<group#>} Disables the flow statistics ping-check function for
a specified group of collector devices.
disable flowstats ports <portlist> Disables the flow statistics function on the
specified SONET ports.
enable flowstats filter <filter#> ports <portlist>
[ingress | egress]
Enables a specified flow record filter for the
specified SONET ports.
enable flowstats ping-check {<group#>} Enables the flow statistics ping-check function for
a specified group of collector devices.
enable flowstats ports <portlist> Enables the flow statistics function on the
specified SONET ports.
show flowstats {<portlist> | export {<group#>}
{detail}}
Displays status information for the flow statistics
function.
unconfig flowstats ports <portlist> Resets the flow statistics configuration
parameters for the specified SONET ports to their
default values.