User guide

Example 1—Example_TCP_Threshold.pol
Extreme Networks Policy Manager (EPM) 1.2 User Guide
57
8 Click the Show All command button again to show only the currently edited policy.
9Close the dialog box.
Modify Rule Parameters
To modify any of the existing rule parameters, use the following procedure. For this example, in the
CF_TCP_THRESHOLD rule, the argument of 100 packets for the "count" parameter is changed to 200
packets.
1 Open the policy "Example_TCP_Threshold.pol."
2 In the Rule Editing and Viewing Panel, select the rule, "CF_TCP_THRESHOLD." In the Rule
Properties Panel under the Rule Parameters tab, the parameters are displayed.
3 In the Rule Parameters, under "Match Conditions" click "count TCP_COUNTER>100, period 5,
hysteresis 0;" All the icons under the text panel are enabled.
4 Click the "Edit arguments of selected" icon . The Rule Parameter Editor dialog box is displayed as
shown below.