User guide

Running Extreme Networks Policy Manager Examples
Extreme Networks Policy Manager (EPM) 1.2 User Guide
54
Save to a Switch
1 Before saving a policy to a switch, make certain that the configuration steps, as described on page 11
and on page 18 have been taken.
2 From the menu, choose File > Save As > Switch.
3 In the Remote Switch Dialog box, enter the required information. (For more detail, see "To Save to a
Switch on page 39.")
4 When the Policy Entry dialog box opens, it prompts with the policy name that was used locally.
That name is accepted here by clicking OK. (For other options, see “Saving a Policy” on page 39.)
This box includes an option to open the Activity Manager dialog after the policy is saved. In this
case, it was not selected.
(This example is being run on a switch that does not support CLEAR-Flow. Therefore, a CLEAR-
Flow Support Notice box opens with a reminder of that limitation and the question of whether to
proceed. Yes is selected.)