User guide

Modifying Rules
Extreme Networks Policy Manager (EPM) 1.2 User Guide
45
2 From the menu, choose Cut. The rule is deleted.
Use the following procedure to delete more than one rule.
1 From either list, mark the rules that are to be deleted using the procedures on page 44.
2 Right-click one of the marked rules and choose Cut all marked. All marked rules are deleted.
NOTE
A policy must contain at least one rule. If the user attempts to delete all rules or the last rule from a policy, the
changes will not be saved.
NOTE
The EPM does not support “undo.”
Modifying Rules
The following changes can be made to an existing rule
Renaming a Rule
To change the name of a rule, use the following procedure:
1 In the Rule Editing and Viewing Panel or the Rule Navigator window, right-click a rule and from the
menu displayed, choose Rename. The following dialog box is displayed.
2 Enter a new name and click OK. The new name is displayed in the rule viewing panels.
Reclassifying a Rule
To change the class of a rule, use the following procedure:
1 Right-click a rule and from the menu displayed, choose Reclassify. A submenu displays available
classes from which to choose or offers the choice to <create a new class>.
2 When <create a new class> is chosen, the following Class Entry Dialog box is displayed.
3 Enter a new class name and click OK. The new class is added to the rule viewing panels and the
rule classification is changed.