User guide

Opening the EPM
Extreme Networks Policy Manager (EPM) 1.2 User Guide
17
2 After reading, Close the box. The following IP Address Notice is displayed. This notice is displayed
every time the EPM is opened until an IP address has been set.
3 Click OK. The EPM then notifies the user if it has found a TFTP server. Without one, the EPM can
open and save local policies only.
a If it finds a TFTP server, the following notice is displayed.
Refer to “Configuring the EPM for use on a Switch” on page 18 to set the policy staging directory.
b If it does not find a TFTP server, the following notice is displayed.
If necessary, take the appropriate action to enable a TFTP server.
4 Click OK to close the box. The EPM Rule Editor window remains.
NOTE
A notice regarding TFTP server availability is also displayed in the Status Panel under the Alerts tab. (Refer to
“Status Panel” on page 23.)