Specifications

ManualsBrandsExtreme Networks ManualsComputers & AccessoriesReliable, high-performance and validated connectivity options for a range of interface needs Note: Latest Transceiver/Optics information as well as compatibility with Extreme platforms can be found on the Extreme Optics Compatibility site

WWW.EXTREMENETWORKS.COM

100GBASE-CWDM4: The Extreme 100GBASE-CWDM4 Optics modules support

link lengths of up to 2Km over a pair of Single mode ﬁbers with duplex LC

connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths

using CWDM wavelengths. Multiplexing and demultiplexing of the four

wavelengths are managed within the device. 100GBASE-CWDM4 requires the

use of FEC.

Note: 100GBASE-CWDM4 is compatible with 100GBASE-4WDM-10 modules up to 2Km

using FEC.

100GBASE-LR4-2: The Extreme 100GBASE-LR4-2 Optics modules support

link lengths of up to 2Km over a pair of Single mode ﬁbers with duplex LC

connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths

using LAN-WDM wavelengths. Multiplexing and demultiplexing of the four

wavelengths are managed within the device. 100GBASE-LR4-2 does not require

the use of FEC.

100GBASE-PSM4: The Extreme 100GBASE-PSM4 Optics modules support link

lengths of up to 2Km over Single mode ﬁbers with MPO-12 connectors. They

provide 100G optical links over 12-ﬁber parallel ﬁber terminated with MPO

connectors. 100GBASE-PSM4 does not require the use of FEC.

100GBASE-4WDM-10: The Extreme 100GBASE-4WDM-10 Optics modules

support link lengths of up to 10Km over a pair of Single mode ﬁbers with duplex

LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths

using CWDM wavelengths. Multiplexing and demultiplexing of the four

wavelengths are managed within the device. 100GBASE-4WDM-10 requires the

use of FEC.

Notes:

1. 100GBASE-4WDM-10 is compatible with 100GBASE-CWDM4 modules up to 2Km

using FEC.

2. 100GBASE-4WDM-10 is not compatible with either 100GBASE-4WDM-20 or

100GBASE-4WDM-40.

100GBASE-LR4: The Extreme 100GBASE-LR4 Optics modules support

link lengths of up to 10Km over a pair of Single mode ﬁbers with duplex LC

connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths

using LAN-WDM wavelengths. Multiplexing and demultiplexing of the four

wavelengths are managed within the device. 100GBASE-LR4 does not require

the use of FEC.

Note: 100G-LR4-QSFP10KM is compatible with 100GBASE-ER4 modules up to 10Km

without using FEC.

100GBASE-4WDM-20: The Extreme 100GBASE-4WDM-20 Optics modules

support link lengths of up to 20Km over a pair of Single mode ﬁbers with duplex

LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths

using LAN-WDM wavelengths. Multiplexing and demultiplexing of the four

wavelengths are managed within the device. 100GBASE-4WDM-20 requires the

use of FEC.

Notes:

1. 100GBASE-4WDM-20 is compatible with 100G-ER4-QSFP40KM and 100GBASE-

4WDM-40 up to 20Km using FEC.

2. 100GBASE-4WDM-20 is not compatible with either 100GBASE-4WDM-10 or

100GBASE-CWDM4.