Specifications

WWW.EXTREMENETWORKS.COM
22
By using Extreme-qualified components, organizations can be assured that their
warranty and service requirements will be met and that their Extreme products
will continually provide the uptime, performance, and reliability required by
today’s leading enterprises and service providers.
Optics Compatibility and Detailed Specifications
Extreme publishes up-to-date Optical transceiver and cable compatibility
information via its Extreme Networks Optics Compatibility website. This
site defines compatibility among transceivers/cables and Extreme switches
and routers, including minimum required software revisions, end-of-sale and
replacement information, and other device-specific notes. In addition, the site
includes detailed specification for each module.
Note: It is highly recommended to only use Extreme Networks-certified pluggable
transceiver modules with Extreme Networks switches and routers.
Features and benefits:
• Hot-swappable input/output device that plugs into a 100 Gigabit Ethernet
Extreme platform
• Interoperable with other IEEE-compliant 100GBASE interfaces where applicable
• Certified and tested on Extreme platforms for superior performance, quality,
and reliability
• High-speed electrical interface compliant to IEEE 802.3bm.
• QSFP Form factor, 2-wire I2C communication interface and other low-speed
electrical interface compliant to SFF 8436 and QSFP Multisource
Agreement (MSA)
Extreme Networks 100Gb QSFP28 Modules
The Extreme 100GBASE Quad Small Form-Factor Pluggable (QSFP28) portfolio
oers customers a wide variety of high-density and low-power 100 Gigabit
Ethernet connectivity options for data center, high-performance computing
networks, enterprise core and distribution layers, and service provider
applications. These modules represent the latest generation of 100G
transceiver modules solution based on a QSFP28 form factor.
100Gb Optics Types/Extreme SKUs
Standard/Type Description Extreme SKUs
100GBASE-SR4
100G SR4 QSFP28, MPO, 100m over OM4,
Multimode Fiber
100G-SR4-QSFP100M
10401
AA1405005-E6
100GBASE-BDSR
100G SR BiDi, QSFP28, LC, 100m over OM4,
Multimode Fiber
100G-SR4BD-QSFP100M
100GBASE-SWDM4
100G SWDM4 QSFP28, LC, 100m,
Multimode Fiber
100G-SWDM4-QSFP100M
100GBASE-ESR4
100G ESR4 QSFP28, MPO, 300m over OM4,
Multimode fiber
100G-ESR4-QSFP300M
100G-QSFP-ESR4
100GBASE-CWDM4
100G CWDM4 QSFP28, LC, 2KM, Single
mode Fiber
100G-CWDM2-QSFP2KM
100GBASE-LR4-2
100G LR4 QSFP28, LC, 2KM, Single mode
Fiber
100G-LR4-QSFP20KM
100GBASE-PSM4
100G PSM4 QSFP28, MPO, 2Km, Single
mode fiber
10405
Make sure to use Extreme's Optics
Compatibility website whenever
researching or specifying
transceivers for Extreme switches
or other devices. It contains the
most up-to-date information on
Extreme-qualified transceivers.