Specifications

WWW.EXTREMENETWORKS.COM
1212
10GBASE-T: The Extreme 10GBASE-T modules support link lengths of up to 30m
over Cat6a copper cable with RJ-45 connectors.
Note: 10GBASE-T requires 2.5W power, hence requires alternate port population
configuration to ensure proper heat dissipation.
10GBASE-USR: The Extreme 10GBASE-USR Optics modules support link lengths
of up to 100m (OM3) over Multimode Fiber with duplex LC connectors.
10GBASE-SR: The Extreme 10GBASE-SR Optics modules support link lengths of
up to 300m (OM3) or 400m (OM4) over Multimode Fiber with duplex
LC connectors.
Note: Part number 10G-SR-SFP300M-ET8PK provides an 8-pack of part number 10G-SR-
SFP300M-ET.
10GBASE-LRM: The Extreme 10GBASE-LRM Optics modules support link lengths
of up to 220m (OM3) over Multimode Fiber with duplex LC connectors. 10GBase-
LRM modules use linear-mode amplifiers.
10GBASE-LR: The Extreme 10GBASE-LR Optics modules support link lengths of
up to 10Km over a pair of Single mode fibers with duplex LC connectors.
Note: Part number 10G-LR-SFP10KM-ET8PK provides an 8-pack of part number 10G-LR-
SFP10KM-ET.
10GBASE-BiDi-10: The Extreme 10GBASE-BiDi-10 Optics modules support
link lengths of up to 10Km over a single fiber with LC connector. They provide
10G optical links over one Single mode fiber by transmitting and receiving
bidirectionally at dierent wavelengths over the same fiber, using one module
which transmits at 1270nm paired with a second module which transmits
at 1330nm.
10GBASE-ER: The Extreme 10GBASE-ER Optics modules support link lengths of
up to 40Km over a pair of Single mode fibers with duplex LC connectors
Note: Customers should ensure that 10GBASE-ER receivers are protected from excessive
input optical power by adding additional optical attenuation if necessary. TX and RX
power levels are described for each module in the Optics compatibility website.
10GBASE-BiDi-40: The Extreme 10GBASE-BiDi-40 Optics modules support
link lengths of up to 40Km over a single fiber with LC connector. They provide
10G optical links over one Single mode fiber by transmitting and receiving
bidirectionally at dierent wavelengths over the same fiber, using one module
which transmits at 1270nm paired with a second module which transmits
at 1330nm.
Note: Customers should ensure that 10GBASE-BiDi-40 receivers are protected from
excessive input optical power by adding additional optical attenuation if necessary. TX
and RX power levels are described for each module in the Optics compatibility website.
10GBASE-ZR: The Extreme 10GBASE-ZR Optics modules support link lengths of
up to 80Km over a pair of Single mode fibers with duplex LC connectors
Note: Customers should ensure that 10GBASE-ZR receivers are protected from excessive
input optical power by adding additional optical attenuation if necessary. TX and RX
power levels are described for each module in the Optics compatibility website.
10G-DACP: Extreme SFP+ to SFP+ passive copper direct-attach cables are
suitable for very short links and oer a cost-eective way to establish a
10-Gigabit link between 10G ports of Extreme platforms. Extreme currently
oers 10G passive copper cables in lengths of 0.5, 1, 3, 5, and 10 meters.