Specifications

ManualsBrandsExtreme Networks ManualsComputers & AccessoriesReliable, high-performance and validated connectivity options for a range of interface needs Note: Latest Transceiver/Optics information as well as compatibility with Extreme platforms can be found on the Extreme Optics Compatibility site

WWW.EXTREMENETWORKS.COM

Highly Reliable, Extreme-Qualiﬁed Optics

This guide provides descriptions of the optical transceiver modules supported

by Extreme Networks switches and routers, along with information about how to

use them. The following types of optical transceiver modules are included:

• Extreme Networks 100Gb QSFP28 Modules

• Extreme Networks 100Gb CFP2 Modules

• Extreme Networks 40Gb QSFP+ Modules

• Extreme Networks 25Gb SFP28 Modules

• Extreme Networks 10Gb SFP+ Modules

• Extreme Networks 20Gb SFP-DD Modules

• Extreme Networks 1Gb SFP Modules

• Extreme Networks QSFP-to-SFP Adapter (QSA) and QSA28 Ethernet Adapter

Extreme Networks oers a complete set of high-performance, reliable, and cost-

eective optical transceivers to help enterprises and service providers meet the

challenges of diverse network topologies. To ensure maximum quality, Extreme

selects and tests the most reliable, highest-performing optical transceivers on

the market, and then warrants their availability, capacity, and performance in

Extreme Networks products.

Extensive performance and reliability testing reﬂects an ongoing commitment

to quality. Extreme Networks tests transceivers using the industry’s most

advanced tools and instruments to help ensure that they provide the right mix of

functionality and performance when used in conjunction with Extreme products.

The speed, capacity, reliability, and low cost of ownership that Extreme is known

for is also provided in all optical components.

Extreme Networks Optical Transceivers and Cables

Highlights

• Optical transceivers that provide

high system reliability based

on rigorous qualiﬁcation and

certiﬁcation testing

• Hot-swappable ﬂexibility in the

ﬁeld for greater ease and lower

total cost of ownership

• Standards-based, including IEEE

802.3z, IEEE 802.3ah, IEEE 802.3u,

IEEE 802.3ae, IEEE 802.3ak, IEEE

802.3ba, IEEE 802.3bm, and IEEE

802.3by compliant as required

• Compliant with Restrictions on

Hazardous Substances (RoHS),

meeting either RoHS 5 or RoHS 6

EU standards

• SFP28, SFP+ and SFP modules and

cables compliant with SFF-8472,

SFF-8432, SFF-8419

• QSFP+, QSFP28 modules

complaint with SFF-8636, SFF-

8679, SFF-8661

Summary of content (14 pages)

PAGE 1
Extreme Networks Optical Transceivers and Cables Highlights • Optical transceivers that provide high system reliability based on rigorous qualification and certification testing Highly Reliable, Extreme-Qualified Optics This guide provides descriptions of the optical transceiver modules supported by Extreme Networks switches and routers, along with information about how to use them.
PAGE 2
Make sure to use Extreme's Optics Compatibility website whenever researching or specifying transceivers for Extreme switches or other devices. It contains the most up-to-date information on Extreme-qualified transceivers. By using Extreme-qualified components, organizations can be assured that their warranty and service requirements will be met and that their Extreme products will continually provide the uptime, performance, and reliability required by today’s leading enterprises and service providers.
PAGE 3
100Gb Optics Types/Extreme SKUs (cont.
PAGE 4
100GBASE-CWDM4: The Extreme 100GBASE-CWDM4 Optics modules support link lengths of up to 2Km over a pair of Single mode fibers with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths using CWDM wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. 100GBASE-CWDM4 requires the use of FEC. Note: 100GBASE-CWDM4 is compatible with 100GBASE-4WDM-10 modules up to 2Km using FEC.
PAGE 5
100GBASE-4WDM-40: The Extreme 100GBASE-4WDM-40 Optics modules support link lengths of up to 40Km over a pair of Single mode fibers with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths using LAN-WDM wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. 100GBASE-4WDM-40 requires the use of FEC. Notes: 1. 100GBASE-4WDM-40 is compatible with 100G-ER4-QSFP40KM up to 40Km using FEC, and with 100GBASE-4WDM-20 up to 20Km using FEC.
PAGE 6
Extreme Networks 100Gb CFP2 Modules The Extreme 100GBASE CFP2 modules offer customers several options for legacy CFP2 deployments.
PAGE 7
40Gb QSFP+ Optics/Extreme SKUs Standard/Type 40GBASE-SR4 40G SR4 QSFP+, MPO, 150m over OM4, Multimode Fiber Extreme SKUs 40G-SR4-QSFP150 AA1404005-E6 10319 40GBASE-BDSR 40G SR BiDi QSFP+, LC, 150m over OM4, Multimode Fiber 40G-BDSR-QSFP150M 10329 40GBASE-ESR4 40G ESR4 QSFP+, MPO, 400m over OM4, Multimode fiber 40G-ESR4-QSFP400M-NT AA1404006-E6 40GBASE-LM4 40G LM4 QSFP+, LC, 160m (OM4) Multimode, 1Km Single mode Fiber 40GBASE-LR4 40GBASE-PSM4 40GBASE-ER4 40G-DACP 40G-DACP Breakout 40G-DACA 4
PAGE 8
40GBASE-SR4: The Extreme 40GBASE-SR4 Optics modules support link lengths of up to 100m (OM3) or 150m (OM4) over Multimode Fiber with MPO-12 connectors. They provide 40G optical links over 12-fiber parallel fiber terminated with MPO connectors. Note: 40G-SR4-QSFP150M and AA1404005-E6 are compatible with 10GBASE-SR, allowing for break-out to 10GBASE-SR transceivers.
PAGE 9
40G-AOC: Extreme QSFP+ to QSFP+ active optical fiber cables are suitable for short to medium links and offer a cost-effective way to establish a 40-Gigabit link between 40G ports of Extreme platforms. Active optical cables are much thinner than copper cables and no Electro Magnetic Interference (EMI) issues, which is critical in high-density systems. Extreme currently offers active optical cables in lengths of 3, 5, 10, 20 and 100 meters.
PAGE 10
25GBASE-ER: The Extreme 25GBASE-ER Optics modules support link lengths of up to 40Km over a pair of Single mode fibers with duplex LC connectors. 25GBASE-ER requires the use of FEC. Note: Customers should ensure that 25GBASE-ER receivers are protected from excessive input optical power by adding additional optical attenuation if necessary. TX and RX power levels are described for each module in the Optics compatibility website.
PAGE 11
20G SFP-DD/QSFP+ DAC Breakout: Extreme SFP-DD to QSFP+ copper directattach breakout cables are suitable for very short links and offer a cost-effective way to establish a 20-Gigabit link between an SFP-DD port of Extreme’s 5420 platform and 2 channels of a QSFP+ port. The SFP-DD connection is wired to channels 1 and 2 of the QSFP+ connector. Extreme currently offers 20G SFP-DDQSFP+ passive copper cables in lengths of 1, 3 and 5 meters.
PAGE 12
10GBASE-T: The Extreme 10GBASE-T modules support link lengths of up to 30m over Cat6a copper cable with RJ-45 connectors. Note: 10GBASE-T requires 2.5W power, hence requires alternate port population configuration to ensure proper heat dissipation. 10GBASE-USR: The Extreme 10GBASE-USR Optics modules support link lengths of up to 100m (OM3) over Multimode Fiber with duplex LC connectors.
PAGE 13
10G-DACA: Extreme SFP+ to SFP+ active copper direct-attach cables are suitable for short links and offer a cost-effective way to establish a 10-Gigabit link between 10G ports of Extreme platforms. Extreme currently offers 10G active copper cables in lengths of 1, 3, 5 7 and 10 meters. 10G-AOC: Extreme SFP+ to SFP+ active optical fiber cables are suitable for short to medium links and offer a cost-effective way to establish a 10-Gigabit link between Extreme platforms.
PAGE 14
1000BASE-LX: The Extreme 1000BASE-LX Optics modules support link lengths of up to 10Km over a pair of Single mode fibers with duplex LC connectors. Note: Part number 10072H provides a 10-pack of part number 10052H. 1000BASE-BIDI-40: The Extreme 1000GBASE-BIDI-40 Optics modules support link lengths of up to 40Km over one Single mode fiber with LC connectors.