Specifications

Issues Resolved in ExtremeWare 7.1.0b48
ExtremeWare 7.1.1 Release Notes 65
If you configure the VRRP master priority to 0 (releasing it as the virtual router) and then configure the
priority to 255, the master is now released (PD2-127681312).
The track-diagnostic and track-environment features are now supported with VRRP (PD2-127681344).
If you configure a new advertisement interval and then reconfigure the interval back to the default,
VRRP no longer elects two master VRRP VLANs (PD2-127681301).
EAPS
EAPS is now supported with WAN modules (PD2-120015201).
You can now change the protected VLAN tag if EAPS is configured and enabled (PD2-121610287).
When configuring EAPS over WAN modules, if the EAPS master is defined with a secondary multilink,
then an ARP broadcast storm over the EAPS ring no longer occurs (PD2-110006429).
You can now configure two different EAPS master domains on the same switch, on the same STP or
EMISTP VLANs and the same STP or EMISTP domains (PD2-72446883).
The EAPS secondary port now recovers correctly in all cases (1-FY31X).
When ESRP and bi-directional rate shaping are configured simultaneously on the same switch, rate
shaping traffic to the ESRP MAC address takes effect immediately (13583).
If you configure a single EAPS ring with 64 domains and more than 3,000 VLANs, a link transition no
longer causes a 300 second traffic outage (PD2-119139401).
Ingress QoS
You can not configure ingress QoS on modules other than “
3
” series modules, as the feature is not
supported on other modules and the configuration has no effect (PD2-129625008).
The
Tx Xoff column in the show ports ingress stats command output no longer truncates values
to seven characters (PD2-130148001).
Security
When you enable the CPU-DoS-Protect feature in simulated mode, an ACL is no longer created when a
DoS attack is simulated, thus traffic is not blocked (PD2-129163414).
If RADIUS is enabled, but access to the RADIUS primary and secondary server fails, the switch no
longer uses its local database to authenticate Network Login users (PD2-139715109).
Unauthenticated Network Login HTTP client sessions are no longer temporarily listed as 802.1x
sessions in the output of the
show netlogin command even if the user is HTTP or if 802.1x
authentication is disabled (PD2-147036722).
The
clear fdb command now resets the Appeared and Learnt counts (PD2-133592701).
When upgrading from ExtremeWare 6.2.2, RADIUS operates correctly (PD2-151787701).