Specifications

54 ExtremeWare 7.1.1 Release Notes
Clarifications, Known Behaviors, and Resolved Issues
Vista
Cannot Enable STP
You cannot enable a STP domain using Vista. If you try, Vista does not generate an error message, but
does not enable STP. (PD2-158471801).
Alpine 3808 Erroneously Displays Four PSUs
Vista displays PSU C and PSU D on an Alpine 3808 chassis. The Alpine 3808 supports only two PSUs,
PSU A and PSU B (PD2-135911601)
Cannot Add Trap Receiver or Community String
On the SNMP configuration page, if you add a trap receiver or community string Vista indicates
success, but does not make the change to the switch. To successfully add a trap receiver or community
string, use the CLI (PD2-120713201).
VLAN Ports Tagging Information Incorrect
In the Virtual LAN Configuration screen, the information for VLAN ports displays incorrect tagging
information (PD2-130140999).
Blackhole Flag Missing
The blackhole flag is missing from the FDB statistics screen (PD2-129387401).
Multicast Address Display
If you configure a routing protocol on multiple interfaces, the Vista statistics page displays the wrong
Locally Registered Multicast Address (PD2-105094265).
Configuration Statistics PSU Display
The Vista configuration statistics switch display for the BlackDiamond 6808 shows four power supplies
when only two are installed (1-D3RSP).
Closing Internet Explorer 4.0
IE 4.0 caches user login information. In some environments, this can be a security issue. As a
work-around, it is best to close the browser after logging out of the switch (1873, 1994).
Vista and RADIUS
If a switch configured for RADIUS authentication loses communication with the RADIUS server,
subsequent attempts to use the Vista Web application will take a very long time (measured in several
minutes). When communication is lost with the RADIUS server, Vista will continue to make
authentication requests for every page. Each request has a timer that will expire leading to an excessive
amount of time to bring up each page (5144).