Specifications

48 ExtremeWare 7.1.1 Release Notes
Clarifications, Known Behaviors, and Resolved Issues
IP Unicast Routing
Multinetting Enabled by Default
Multinetting is enabled by default (PD2-129703201).
Reset the FDB Aging Timer
When you disable multinetting, you must reset the FDB aging timer to 300 seconds using the
configure fdb agingtime command (PD2-160697401).
Deleting a Static Entry Using SNMP
If you delete a static IPARP entry using SNMP, the line in the configuration creating that entry is not
deleted. Thus, if you reboot, the static entry is again created. To work around this, either edit the
configuration or delete static IPARP entries through a direct connection to the switch (PD2-130505418).
The show iproute Output
The output of the show iproute command displays only the first 8 characters of the VLAN name
(PD2-128392829).
Traffic Crosses Layer 3 Boundary
If ingress and egress VLANs do not share a port, layer 3 traffic with a broadcast MAC and unicast IP
address is incorrectly forwarded to the default route across a layer 3 boundary (PD2-119375325).
No Static ARP Entries
The use of Static ARP entries associated with superVLANs or sub-VLANs is not supported in this
release (5106).
ARP Entry Age
The age of ARP entries changes to a large value when system time is changed (1-E7FIV).
Multinetting and the Show VLAN Stats Command
The show vlan stats <vlan_name> command is not supported on multinetted VLANs (12196).
Multinetting and VRRP
Multinetting is not supported with VRRP (1-9YG1B).
RIP Routing
RIPv2 Authentication
The authentication feature of RIPv2 is not supported.