Specifications
32 ExtremeWare 7.1.1 Release Notes
Clarifications, Known Behaviors, and Resolved Issues
BOOTP-Dependent Routes in Downloaded Configuration not Created
Static and default routes that depend on a BOOTP IP address/subnet are not created when you
download a configuration (PD2-86888351).
The disable learning Command and Flooding
The disable learning command does not remove the port from the security flood list. Thus, you cannot
disable flooding when learning is disabled (PD2-73199618).
Port Mirroring
Port mirroring is not supported across BlackDiamond modules (PD2-89313413).
Port mirroring is not supported with CPU-generated traffic (1-64H4J).
Port Tag Limitation
There is an absolute limit of 3552 port tags available in a system. The usage of these port tags depends
on a combination of factors:
• Installed ATM, MPLS, ARM, and PoS modules
• Mirroring
• IPX routing
• Static FDB entries
If the switch reaches the limit of available port tags, the following messages appear in the syslog:
<WARN:HW> tNetTask: Reached maximum otp index allocation
<WARN:HW> tBGTask: Reached maximum otp index allocation
If this occurs, you must compromise some features (for example, mirroring) in order to expand your use
of other functionality. (1-E5U7Y).
WinSCP2 Not Supported
The application WinSCP2.exe is not supported. Using WinSCP2 does not cause any problems
(1-A5C6C).
BlackDiamond
Cross-Module Trunking Module Support
Table 9 lists the modules that support load-sharing across modules.
Table 9: Cross-module trunking module support
Module CMT Support
G8Xi Yes
G8Ti Yes
G12SXi Yes