Technical Specs
Table Of Contents
- ExtremeSwitching CES/CER 2000 Series Technical Specifications
- ExtremeSwitching CES/CER 2000 Series Technical Specifications
- System specifications
- Ethernet
- LEDs
- Other
- Weight and physical dimensions
- Environmental requirements
- Power supply specifications (per PSU)
- Power consumption (idle configuration)
- Power consumption (typical configuration)
- Power consumption (maximum configuration)
- Data port specifications (Ethernet)
- Serial port specifications (DB9)
- Serial port specifications (pinout RJ-45)
- Serial port specifications (protocol)
- Memory specifications
- Regulatory compliance (EMC)
- Regulatory compliance (safety)
- Regulatory compliance (environmental)
- ExtremeSwitching CES/CER 2000 Series Technical Specifications
ExtremeSwitching CES/CER 2000 Series
Technical Specications
This document highlights the features and specications for CES/CER 2000 Series devices.
System specications
System component Description
Enclosure 1U
Power inlet C14
Power supplies One internal AC or DC power supply, 1+1 redundancy
Fans 6
Cooling Six 4-speed fans; front-to-back airow
Ethernet
System component Description
SFP GbE ports 24 SFP, 4 Combo, 2 XFP
24 SFP, 4 Combo, 4 SFP+
48 SFP, 2 XFP
Ethernet management port 10/100/1000 MbE RJ-45
LEDs
System component Description
10/100/1000 Port LEDs
Lnk/Act Indicates whether a link is up or down and the port is transmitting and receiving trac
10-Gbps Port LEDs on devices with two or four 10-Gbps ports
Lnk/Act (2 LEDs) Indicates whether the ber port is connected and the trac is being transmitted and received on the ber port
Power and fan status LEDs
Fan Indicates the status of the fan tray
AC PS1 Indicates whether power supply 1 is installed and operating normally
AC PS2 Indicates whether power supply 2 is installed and operating normally
DC Indicates whether the power supply has DC power
ExtremeSwitching CES/CER 2000 Series Technical Specications
53-1003423-03 5