Installation Guide

you are connecting to this session
2 seconds in idle
Telnet connections (inbound):
1 established, client ip address 192.168.9.37
27 seconds in idle
Telnet connection (outbound):
SSH connections:
Syntax: exclude show-command | regular-expression
Displaying lines starting with a specied string
The following command lters the output of the show who command so it displays output starting with the rst line that contains the
word "SSH". This command can be used to display information about SSH connections to the Extreme Networks device.
device# show who | begin SSH
SSH connections:
1 established, client ip address 192.168.9.210
7 seconds in idle
2 closed
3 closed
4 closed
5 closed
Syntax: begin show-command | regular-expression
Searching and
ltering output at the --More-- prompt
The --More-- prompt displays when output extends beyond a single page. From this prompt, you can press the Space bar to display
the next page, the Return or Enter key to display the next line, or Ctrl-C to cancel the display. In addition, you can search and lter output
from this prompt. For example.
device# ?
append Append one file to another
attrib Change file attribute
boot Boot system from bootp/tftp server/flash image
cd Change current working directory
chdir Change current working directory
clear Clear table/statistics/keys
clock Set clock
configure Enter configuration mode
copy Copy between flash, tftp, config/code
cp Copy file commands
debug Enable debugging functions (see also 'undebug')
delete Delete file on flash
dir List files
dm test commands
dot1x 802.1X
erase Erase image/configuration files from flash
exit Exit Privileged mode
fastboot Select fast-reload option
force-sync-standby Sync active flash (pri/sec/mon/startup config/lp images)
to standby
format Format PCMCIA card
hd Hex dump
ipc IPC commands
--More--, next page: Space, next line: Return key, quit: Control-c
At the --More-- prompt, you can press the forward slash key (/ ) and then enter a search string. The device displays output starting
from the
rst line that contains the search string, similar to the begin option for show commands. For example.
--More--, next page: Space, next line: Return key, quit: Control-c
/telnet
CLI Functionality
ExtremeSwitching CES 2000 Series and ExtremeRouting CER 2000 Series Hardware Installation Guide
64 53-1004198-03