Installation Guide

Brocade MLX Series and Brocade NetIron XMR Installation Guide 25
53-1004195-02
Router modules
DRAFT: BROCADE CONFIDENTIAL
FIGURE 19 BR-MLX-1GFx24-X and BR-MLX-1GFx24-X-ML fiber interface module front panel
The front panel includes the following features:
• Arrow-shaped LEDs in center horizontal strip for all ports. LEDs to the left support the top ports, LEDs to the right (pointing
down) support the bottom ports.
• 24 1 Gbps fiber ports
<Link>Table 11 describes the LEDs for the BR-MLX-1GFx24-X and BR-MLX-1GFx24-X interface modules.
For a list of SFP optics supported for the BR-MLX-1GFx24-X and BR-MLX-1GFx24-X interface modules, refer to the latest version of
the Brocade Optics Family Data Sheet, available online in the following location:
http://www.brocade.com/downloads/documents/data_sheets/product_data_sheets/optics-family-ds.pdf
Power supply requirements for BR-MLX-1GFx24-X and BR-MLX-1GFx24-X-ML interface modules
For power supply requirements for BR-MLX-1GFx24 and BR-MLX-1GFx24-X ML (24-port 1 Gbps) fiber interface modules, refer to
<Link>“Hardware Specifications”.
20-port 100/1000 Ethernet interface module
<Link>Figure 20 shows the front panel of the 20-port 100/1000 Gbps Ethernet SFP interface module.
FIGURE 20 20-port 100/1000 Ethernet module front panel
The front panel includes the following features:
• LEDs to the left support the top ports, LEDs to the right support the bottom ports
• 20 100/1000 Ethernet SFP ports
<Link>Table 12 describes the LEDs for the 20-port 100/1000 Ethernet module.
TABLE 11 BR-MLX-1GFx24-X and BR-MLX-1GFx24-X interface module LEDs
Position State Meaning
Arrow-shaped LEDs in center
horizontal strip between ports.
Left LEDs support upper ports.
Right LEDs support lower ports.
Solid green A link has been established.
Green blinking The port is transmitting and receiving packets.
Off No link exists, and the port is not transmitting or receiving
packets.