Installation Guide

Brocade MLX Series and Brocade NetIron XMR Installation Guide 285
53-1004195-02
Power cords
DRAFT: BROCADE CONFIDENTIAL
Management port pin assignments
The management port is an RJ45 UTP connector. The following table describes the pin assignments for this connector. For information
about how you can use this port, refer to “10/100/1000 Ethernet port” on page 12.
Power cords
The types of power cords provided with routers are specific to the country where they are installed. To order a power cord, contact your
Brocade supplier. The following table describes power cord types.
TABLE 53
Management port pin assignments
Pin number MDI-X ports
1TD+
2TD-
3RD+
4 Not used (10BaseT)
CMT (100BaseTX)
5 Not used (10BaseT)
CMT (100BaseTX)
6RD-
7 Not used (10BaseT)
CMT (100BaseTX)
8 Not used (10BaseT)
CMT (100BaseTX)
TABLE 54 Power cord types (international)
Country Plug style
NEMA
5-15P
125V for
MLXe/MLX
4, 8, 16-slot
devices
NEMA
5-20P
125V. 16A
for
MLXe/MLX
4, 8, 16-slot
devices
NEMA
L6-20
CEE-7/7
“Schuko”
BS-1363A AS 3112 IEC-60309
20A. 3-wire,
220 - 250V
NBR 14136
Argentina X
Australia X
Austria X
Bahrain X
Belgium X
Brazil X
Canada X X