Manualshelf

Installation Guide

ManualsBrandsExtreme Networks ManualsComputers & AccessoriesMultiservice IP/MPLS Core, WAN Edge, Border Router, IPSec Router and Network Packet Broker
281282283284285286287288289290
Brocade MLX Series and Brocade NetIron XMR Installation Guide 271
53-1004195-02
Replacing fan assemblies
DRAFT: BROCADE CONFIDENTIAL
FIGURE 165 Air filter removal and replacement for a Brocade MLX or NetIron XMR 4-slot router.
FIGURE 166 Air filter removal and replacement for the 8-slot router.
3. Pull the old air filter out of the router and discard it.
4. Insert the replacement air filter by sliding it along the metal guides.
The filter is marked with an arrow that indicates how the filter should be installed for proper airflow in the device. Since air is
pulled through the router, the arrow must point right towards the fan tray.
5. Push the filter retainer into the router and tighten the two screws.
1 Direction of airflow in device 3 Filter retainer
2Filter 4Fan trap
1 Direction of airflow in device 3 Filter retainer
2 Filter 4 Fan trap