Manualshelf

Installation Guide

ManualsBrandsExtreme Networks ManualsComputers & AccessoriesMultiservice IP/MPLS Core, WAN Edge, Border Router, IPSec Router and Network Packet Broker
281282283284285286287288289290
Brocade MLX Series and Brocade NetIron XMR Installation Guide 267
53-1004195-02
Replacing fan assemblies
DRAFT: BROCADE CONFIDENTIAL
FIGURE 160 Replacing a fan tray assembly in a Brocade MLX or NetIron XMR 8-slot router.
FIGURE 161 Replacing the fan assembly in a Brocade MLXe 8-slot router
3. Insert the new fan assembly into the fan slot and push the enclosure in until the faceplate is flush with the router. Pushing the
enclosure in seats the fan connector with the router connector.
4. Tighten the four captive screws to secure the fan to the router.
5. Access the CLI, and enter the show chassis command to verify that the fans are operating normally.
1 Latch release 2 Fan tray assembly