Installation Guide

ManualsBrandsExtreme Networks ManualsComputers & AccessoriesMultiservice IP/MPLS Core, WAN Edge, Border Router, IPSec Router and Network Packet Broker

14 Brocade MLX Series and Brocade NetIron XMR Installation Guide

53-1004195-02

Router modules

BR-MLX-100GX-1 1 MLXE/XMR/MLX 1-port 100-GbE (X) Module with IPv4/IPv6/MPLS hardware

support - requires CFP optics. Supports 1M IPv4 routes in FIB in XMR mode and

512K IPv4 routes in MLX mode. Requires high speed switch fabric modules.

License upgradable to 2-ports on a MLXe.

BR-MLX-100GX-2 2 MLXE 2-port 100-GbE (X) Module with IPv4/IPv6/MPLS hardware support -

requires CFP optics. Supports 1M IPv4 routes in FIB in XMR mode and 512K

IPv4 routes in MLX mode. Requires high speed switch fabric modules.

NI-MLX-10GX4 4 NetIron MLX Series 4-port 10-GbE module with IPv4/IPv6/MPLS hardware

support - requires XFP optics

NI-XMR-10Gx4 4 NetIron XMR Series 4-port 10-GbE module with IPv4/IPv6/MPLS hardware

support - requires XFP optics

BR-MLX-10GX4-X 4 XMR/MLXe 4-port 10-GbE (X) module with IPv4/IPv6/MPLS hardware support

- requires XFP optics. Supports 1M IPv4 routes in FIB.

BR-MLX-10Gx4-X-ML 4 MLX/MLXe 4-port 10-GbE (ML) module with IPv4/IPv6/MPLS hardware

support-requires XFP optics. Supports 512K IPv4 routes in FIB. License

Upgradable to "X" scalability (1M IPv4 routes in FIB).

BR-MLX-40Gx4-M 4 MLXe 4-port 40-GbE (M) module with Layer 2, IPv4/IPv6, MPLS and

OpenFlow supports 512K IPv4 routes in FIB, and requires high speed switch

fabric modules and QSFP+ optics.

NI-MLX-10GX8-M 8 Brocade MLX Series 8-port 10-GbE (M) module with IPv4/IPv6/MPLS

hardware support - requires SFPP optics. Supports 512K IPv4 routes in FIB.

Requires high speed switch fabric modules

NI-MLX-10GX8-D 8 Brocade MLX Series 8-port 10-GbE (D) module with IPv4/IPv6 hardware

support - requires SFPP optics. Supports 256K IPv4 routes in FIB. Doesn't

support MPLS. Requires high speed switch fabric modules

BR-MLX-10GX8-X 8 MLXe/XMR 8-port 10-GbE (X) module with IPv4/IPv6/MPLS hardware

support-requires SFPP optics. Supports 1M IPv4 routes in FIB. Requires high

speed switch fabric modules.

NI-MLX-1GX20-SFP 20 NetIron MLX Series 20-port FE/GE (100/1000) module with IPv4/IPv6/MPLS

hardware support - requires SFP optics. Note: Copper SFPs are supported at

1000Mbps only

NI-XMR-1GX20-SFP 20 NetIron XMR Series 20-port FE/GE (100/1000) module with IPv4/IPv6/MPLS

hardware support - requires SFP optics. Note: Copper SFPs are supported at

1000Mbps only

NI-MLX-1GX20-GC 20 NetIron MLX Series 20-port 10/100/1000 copper module with

IPv4/IPv6/MPLS hardware support

NI-XMR-1Gx20-GC 20 NetIron XMR Series 20-port 10/100/1000 copper module with

IPv4/IPv6/MPLS hardware support

BR-MLX-1GCX24-X 24 XMR/MLXE 24-port 10/100/1000 Copper (RJ-45) Module with

IPv4/IPv6/MPLS hardware support. Supports 1M IPv4 routes in FIB.

BR-MLX-1GCX24-X-

24 MLX/MLXE 24-port 10/100/1000 Copper (RJ-45) Module with

IPv4/IPv6/MPLS hardware support. Supports 512K IPv4 routes in FIB. License

Upgradable to “X” scalability (1M IPv4 routes in FIB).

BR-MLX-1GFx24-X 24 XMR/MLXE 24-port 1-GbE Fiber (SFP) Module with IPv4/IPv6/MPLS

hardware support. Supports 1M IPv4 routes in FIB.

BR-MLX-1GFX24-X-

24 MLX/MLXE 24-port 1-GbE Fiber (SFP) Module with IPv4/IPv6/MPLS hardware

support. Supports 512K IPv4 routes in FIB. License Upgradable to “X” scalability

(1M IPv4 routes in FIB).

TABLE 3 Interface modules for all Brocade MLX Series and NetIron XMR routers (Continued)

SKU Ports Description