Installation Guide

164 Brocade MLX Series and Brocade NetIron XMR Installation Guide
53-1004195-02
Installing a NetIron XMR 32000 router
FIGURE 116 Removing bolts and screws on the shipping crate
3. Remove the remaining bolts and screws that attach the bottom of the crate to the pallet.
4. Slide the sides, top, and back of the crate backwards as one unit until it clears the pallet.
5. Save the crate (including the shipping panel) in case the router needs to be shipped again.
Installing a NetIron XMR 32000 router in a rack
This section describes how to install a NetIron XMR 32000 router in a rack.
Keep the following precautions in mind when mounting a NetIron XMR 32000 router in a rack:
Make sure the rack or cabinet housing the router is adequately secured to prevent it from becoming
unstable or falling over.
Because of the weight of a fully loaded NetIron XMR 32000 router, it is recommended that you mount the router in a rack before
installing the modules and AC power supplies.