Installation Guide

Brocade MLX Series and Brocade NetIron XMR Installation Guide 145
53-1004195-02
Installing a NetIron XMR 8000 router
DRAFT: BROCADE CONFIDENTIAL
FIGURE 102 Positioning the screws in a rack
3. Starting at the bottom of the rack, mount the router in the rack as shown in Figure 103. Slip the wide portion of each keyhole slot
over the corresponding screw in the rack.
FIGURE 103 Mounting the NetIron XMR 8000 router in a rack (front-mount configuration)
4. Slide the router down so that the screw heads are in the narrow portion of the keyhole slots.
5. Tighten the screws to secure the router.
1 Unequal flange equipment rack 2 Network equipment rack
1 Standard 19-inch rack 2 Mounting screws
5"
3"
1 2
1
2