Manualshelf

Installation Guide

ManualsBrandsExtreme Networks ManualsComputers & AccessoriesMultiservice IP/MPLS Core, WAN Edge, Border Router, IPSec Router and Network Packet Broker
121122123124125126127128129130
114 Brocade MLX Series and Brocade NetIron XMR Installation Guide
53-1004195-02
Installing a Brocade MLX-32 router
DRAFT: BROCADE CONFIDENTIAL
FIGURE 84 Installing a power supply in a Brocade MLX-32 router
Carefully follow the mechanical guides on each side of the power supply slot and make sure the power
supply is properly inserted in the guides. Never insert the power supply upside down.
4. Push the power supply front panel toward the back of the router to engage the backplane connector.
5. Pull the release latch on the power supply front panel up to lock the power supply in place, and screw the retaining screw into
place.
6. Install a blank power supply faceplate into each empty slot.
1 Power supply indicators 6 Latch handle locked
2 AC OK 7 Power supply blank cover
3 DC OK 8 Pull down on plunger to remove
4 ALM 9 Power supply
5 Latch handle open