Installation Guide

Brocade MLX Series and Brocade NetIron XMR Installation Guide 93
53-1004195-02
Installing a Brocade MLX-32 router
DRAFT: BROCADE CONFIDENTIAL
Slide chassis onto the saddle
FIGURE 66 Slide the device into the rack
4. Use the provided standard #12-24, #10-32 or M6 pan head screws (dependent on the specifications of your rack) in each
available hole on the rack mount bracket to attach the router to the rack mounting poles. See Figure 67.
5. Visually inspect the alignment of the router. If the router is installed properly, the mounting screws on both sides rack should be
aligned with the mounting screws on the opposite side and the router should be level.
1 Front (port side) of rack mounting post
2 Rear side of rack mounting post
1 Align bottom of router slightly above the seat of the saddle using mechanical lift.
2 Using at least two people, slide router gently onto saddle and into the rack.